Reaserrador Doble TITAN4 & TITAN6 – T6-R
Reaserrador Doble TITAN
The TITAN 4 and TITAN 6 Twin Resaws offer ultra-fast size changes during the resawing process. As little as 0.3 seconds is needed to change the size for each and every sideboard (depending on thickness), even when feeding at over 20 pieces per minute (depending on board length). As a result optimal recovery is achieved, unlocking extra product that previously would have gone to waste.
Importantly, no sorting of material is needed prior to this machine. Both the TITAN 4 and TITAN 6 models make use of the same heavy duty feed systems. With its larger 6-inch blades, the TITAN 6 model is capable of faster feed speeds, thereby offering higher production capacity. By using a Twin Head configuration, it is possible to make two cuts into each sideboard with only one pass.
The TITAN 4 and TITAN 6 Twin Resaws are ideal for medium to high production sawmills.
* available in single or twin head configurations
KEY FEATURES:
Feed speeds up to 60/80 m/min (TITAN 4/6)
Compatible for blade sizes: 100 or 125 mm/150 mm (TITAN 4/6)
Throat width 430/450 mm (TITAN 4/6)
Single or twin-head configurations
Electric servo sizing system for fast size changes under 0.3 seconds! (depending on thickness)
Heavy duty slatt-chain feed with variable speed
Powered hold-down rollers on both the in- and out-feeds for fast, accurate material feed
Robust TITAN headrig column for high strain, high speed sawmilling
T4-R/TR Specification
| Head configuration | Single head or Twin head |
| Throat width | 430mm |
| Min Material height | 15mm |
| Max Material height | 320mm |
| Blade width | 100mm or 125mm (4 inch or 5 inch) |
| Blade kerf | 2.5mm |
| Main saw motors | 22kW or 30kW (29.5HP or 40.2HP) |
| Feed motor | 1.5kW (2HP) |
| Feed speed | 0 – 60m/min (motor and blading dependant) Electronic variable feed speed control |
| Feed type | Heavy duty slatt-chain |
| Band wheel diameter | 950mm |
| Band wheel width | 100mm |
| Sizing method | Electric servo sizing system |
| Saw tensioning | Hydraulic with spring |
| Hold downs | Driven with pneumatic pressure |
| Optional extras | Board scanning and intelligent sizing, Pneumatic assisted hold down |
T6-R/TR Specification
| Head configuration | Single head or Twin head |
| Throat width | 450mm |
| Min Material height | 15mm |
| Max Material height | 330mm |
| Blade width | 150mm (6 inch) |
| Blade kerf | 2.5mm |
| Main saw motors | 45kW or 55kW (60.3HP or 73.8HP) |
| Feed motor | 2.2kW (3HP) |
| Feed speed | 0 – 80m/min (motor and blading dependant) Electronic variable feed speed control |
| Feed type | Heavy duty slatt-chain |
| Band wheel diameter | 1200mm |
| Band wheel width | 150mm |
| Sizing method | Electric servo sizing system |
| Saw tensioning | Hydraulic with spring |
| Hold downs | Driven with pneumatic pressure |
| Optional extras | Board scanning and intelligent sizing, Pneumatic assisted hold down |
[embeddoc url=”http://www.mahego.com/wp-content/uploads/2020/03/T4-T6-RTR-Titan.pdf” download=”all” viewer=”google”]
